Description
ECTestr Low Conductivity Tester ideal untuk kondisi lapangan yang keras. Ditambah lagi itu mengapung!
Sensor yang Dapat Diganti Pengguna – gunakan kembali badan penguji yang sama untuk penghematan biaya jangka panjang
Features ECTestr Low:
- Waterproof, Dustproof Housing – IP67 rated, ideal for harsh field conditions. Plus it floats!
- User-Replaceable Sensor – reuse the same tester body for long term cost savings
- Full Reading Displayed – no need to multiply the readout to obtain actual test values
- Automatic Temperature Compensation (ATC) – ensures optimum accuracy under fluctuating temperatures
- Auto-Power Off, Hold Function and Self-Diagnostic
- Dip-Type Sensors (ECScan Low/High) allows direct immersion into sample
- Valox® sensor housing for good chemical compatibility and durability
Specifications Eutech ECTestr Low
| Range | 0 to 1990 µS/cm | |
| Resolution | 10 µS/cm | |
| Accuracy | ±1% Full Scale | |
| Temperature Coefficient | 2% per °C | |
| Operating Temperature | 0 to 50 °C | |
| Special Functions | Self-diagnostic; Hold; Auto-Power Off after 8.5 minutes | |
| Power | 4 x 1.5V button cell batteries | |
| Measures | TDS or Conductivity | |
| Range | TDSTestr Low: 0 to 1990 ppm | |
| TDSTestr High: 0 to 10.00 ppt | ||
| ECTestr Low: 0 to 1990 µS | ||
| ECTestr High:0 to 19.90 mS | ||
| Resolution | TDSTestr Low: 10 ppm | |
| TDSTestr High: 0.10 ppt | ||
| ECTestr Low: 10 µS | ||
| ECTestr High:0.10 mS | ||
| Accuracy | ±1% full-scale | |
| Calibration | One point push button | |
| Waterproof/Dustproof (IP67) | Yes | |
| ATC | Yes | |
| Electrode | Replaceable | |
| Operating Temperature | 0 to 50°C (32 to 122°F) | |
| Power | Four 1.5 V batteries | |
| Battery life | 140 hours continous use | |
| Dimensions | 6.5″ x 1.5″ dia (16.5 cm x 3.8 cm dia) | |
| Shipping weight | 4.5 oz (125 g) |
Applications:
General: ECTestr Low tester series can measure natural water, verify reverse osmosis system operation and tap water quality. Check nutrient solution concentration in hydroponics applications. ECTestr High models measure salt water, wastewater, cooling tower water, and boiler condensate. Measure salinity for ponds and recirculating systems. Check saline and chemical levels in pools and spas.
Eutech ECTestr Low Conductivity Tester >>>>> Spec sheet (PDF)
Reviews
There are no reviews yet.