Lutron DW-6095 Wattmeter Analyzer

Description

Lutron DW-6095 Wattmeter Analyzer adalah 3 Phase Power Analyzer dengan pengukuran harmonik.

3 Phase Power Analyzer Lutron DW-6095 menghadirkan analisis daya dasar, dan pencarian kesalahan dalam genggaman sebagian besar teknisi. Termasuk kit lengkap siap pakai untuk mengukur semua parameter daya pada instalasi industri hingga 1200A, dengan ekstensi menggunakan penjepit CP3000 hingga 3000A.

Fitur Lutron DW-6095

• Analisis untuk sistem multi-daya 3 fasa, 1P/2W, 1P/3W, 3P/3W, 3P/4W.
• 3 probe arus (CP-1201) disertakan, jika mengubah probe arus, prosedur kalibrasi tidak diperlukan.
• Sinyal/rentang input probe saat ini dengan pilihan:
  Sinyal input (ACV): 200mV / 300mV / 500mV / 1V / 2V / 3V.
  Rentang (ACA): 20A / 200A / 2000A / 30A / 300A / 3000A.
• Meter dapat bekerja sama dengan probe arus universal.
• Set lengkap dengan 4 PC Test Leads, 4 PCs Alligator clips, 3 PCs Clamp Probe (CP 1201), adaptor AC ke DC 9V, kartu memori SD 2GB, dan tas jinjing.

Specifications Lutron DW-6095 Wattmeter Analyzer

Circuit		Custom one-chip of microprocessor LSI circuit
Display		* LCD Size : 81.4 X 61 mm ( 3.2 X 2.4 inch )
		* Dot Matrix LCD (320 X 240 pixels ) with back light.
Measurement		* V (phase-to-phase)
		* V (phase-to-ground)
		* A (phase-to-ground)
		* KW / KVA / KVAR / PF (phase)
		KW / KVA / KVAR / PF (system)
		KWH / KVAH / KVARH / PFH (system)
		* Power factor
		* Phase angle
		* Frequency
		* Harmonics display.
Wire connections		1P/2W, 1P/3W, 3P/3W, 3P/4W.
Voltage ranges		10 ACV to 600 ACV, auto range.
Current probe input signal and range		* Current probe input signal volage ( ACV ) :
		200mV/300mV/500mV/1V/2V/3V.
		* Current probe input current range ( ACA ) :
		20 A/200A/2000A (1200 A)/30A/300A/3000A
		* Meter can cooperate the universal current probe.
Safety standard		IEC1010 CAT III 600 V.
ACV input impedance		10 Mega ohms.
Range select		ACV | Auto range.
		ACA | Manual range.
Clamp frequency response		40 Hz to 1 KHz.
Spec. tested frequency		45 to 65 Hz.
Over load protection		ACV | 720 ACV rms
		ACA | 1300 ACA with clamp probe
		* For the Clamp ,CP-1201
Data Hold		Freeze the display reading.
Data Record		SD Card Record.
Sampling Time		Approx. 1 second.
Power ON/OFF		Manual OFF by push button.
Over Indicator		* LCD display show ” OL “.
		* The data save into the SD card will show
		9999  or ” 999 “( overleap the decimal point ).

Paket termasuk

• Lutron DW-6095
• Instruction Manual
• Test Leads (TL88-4AT) 4pcs
• Alligator clips (TL88-4AC) 4pcs
• 1200A Clamp Probe (CP-1201-A1/A2/A3) 3pcs
• AC to DC 9V Adapter 1pc
• SD Card 2GB 1pc
• Soft Carrying Bag CA-92 1pc

Optional Accessories

• USB Cable , USB-01
• RS232 cable, UPCB-02
• 2000 A Clamp Probe, CP-2000-A1/A2/A3
• 3000 A Flexible Clamp Probe, CP-2000-A1/A2/A3
• 200 A Clamp Probe, CP-200-A1/A2/A3
• Data Acquisition software, SW-U811-WIN