SNDWAY SW-593 Digital Refractometer Brix 0-55%

Description

SNDWAY SW-593 Digital Refractometer adalah Alat pengukur konsentrasi gula dalam suatu larutan, buah, sayur, dll. Dapat digunakan untuk kebutuhan industrial, scientific research, quality control, dll

Refractometer SW-593 dapat mengukur konsentrasi gula dalam buah, minuman dan sayuran, dapat digunakan dalam manajemen kualitas minuman, sektor industri makanan, penelitian ilmiah produksi pertanian.

SNDWAY SW-593

Multifungsi

• Kompensasi suhu
• Fungsi tampilan indeks bias
• Pengukuran Konsentrasi Gula

IP65 Tahan Debu & Tahan Air

• Desain slot sampel, tahan korosi
• Layar LCD lampu latar
• Prisma bias, resolusi dan akurasi tinggi

Baterai Isi Ulang

• Konsumsi daya rendah
• Dapat mengukur 20.000 kali saat terisi penuh

Spesifikasi SNDWAY SW-593 Digital Refractometer Brix 0-55%

Model Name		SW-593		Range		0-55%Brix
Temperature Compensation		10℃ ~ 40℃		Ambient Temperature		10℃ ~ 40℃
Full of Electricity		About 20000 times		Resolution		0.1%Brix
Accuracy		±0.2%Brix/±1℃		Battery		2×1.2V AA 2100mAh NiMH battery
Product size		300g/120x55x30mm		Package size		330g/170x115x65mm
Package Contents:		Sndway SW-593 Device, USB Charging, User’s Manual, Lens Cleaning Cloth, 2* 1.2V AA Rechargeable Battery, Pipet
You may get some status notice as bellow
Status Bar Notice				Reason
Please cover the container with your hands.				External light is too strong to affect measurement
High temperature affects measurement!				The temperature on the prism is higher than the measuring range
Low temperature affects measurement!				The temperature on the prism is below the measuring range
Please pour the solution into the container.				No solution or too little solution in container
Please pour clean water into the container.				No water or too little water in the container
Out of range!				Excessive concentration
Low battery!				Charging with 5V charger or computer USB
Please contact the Maintenance Center.				Components are possibly damaged
Cautions
Cold or hot measuring solution				Solution:
				Drop in the measuring solution and wait 20 seconds before measuring.
				Because the instrument needs to do temperature supplement, this requires the instrument and the measuring solution to maintain the same temperature, and this takes more than 20 seconds
Measuring solution containing suspended substances				Solution (Step 1):
				Remove suspended solids from measuring solution with filter spoon or gauze as much as possible.
				Solution (Step 2):
				Mix measuring solution evenly (do not use metal and hard objects, and avoid scratching the optical prism). Because uneven measuring solutions or suspended solids can lead to instrumental
Zero-setting
Measure whether the clean water or pure water is 0.0% before using,and if it is not 0.0%, it will be zeroed first.
1, Keep about 1mm between dripped water or pure water and the top of the measuring slot, and the capacity is about 0.3ml
2, Press “MEAS” key
3, Check if the measured value is 00.0%
4, If the value is not 00.0%,press the zero key to reset